在你点开软件后，会有如下的英文的，你复制INSTALLER，这段代码，会有用的，点击OK，此时会出现如下界面；

在这里把刚复制的加进去，再点击OK，

会出现；

USB是连接线的类型的，如果你是使用RS232就选择RS232连接，小黑点是密码，初始密码是1234，如果修改过，就使用新密码登录的。

nformation before programming
===================================================================
<< Default Programmer Code (saved in PC) >>
Installer level : INSTALLER
Administrator level : ADMIN
User level : USER

<< Default Password (saved in PBX) >>
Installer level : 1234
Administrator level : 1234
User level : 1234
The administrator level password is used for PBX Web Manager also.
Changing password from default is strongly recommended to prevent unexpected access..

<< Notice >>
// Updating from MPR V3.0 to MPR V3.2 //
When updating from MPR V3.0 to MPR V3.2, the new PMPR software file and DINI files must be transferred to the SD card.
However, it is not necessary to convert the DSYS file or perform default clear.
*) If the DINI file is not updated to MPR V3.2, the PCMC for MPR V3.2 cannot be activated.

// COLP //
COLP for ISDN ports is disabled by default from MPR software version 3.xxxx, to prevent problems when using ISDN lines that do not support COLP service.

// Private network to public trunk access //
Private network to public trunk access is disabled by default from MPR software version 3.xxxx, to prevent unexpected access.
The default class of service (COS)/TRS of trunk groups is level 7.
===================================================================
===================================================================